Superbat's Mini-SMB 75 Ohm connector family provides broadband capability through 2 GHz. Its snap-on design offers a quick connect/disconnect and utilizes die cast components in non-critical areas to provide a low cost solution.
The Mini-SMB also features a reduced housing allowing circuit miniaturization and efficient space utilization. These connectors are built in accordance with requirements of Mil-C-39012 and the interface is in compliance with Mil-STD 348.
FEATURES AND BENEFITS
75 Ohm snap-on coupling allows for quick installation
Same interface as 50 Ohm SMB
Product interchangeable with competitors
Diecast components which offers low cost solution
Frequency range from 0-2 GHz
APPLICATIONS
Telecom
Switching Equipment
Networking Systems
MINI-SMB SPECIFICATIONS
Electrical | |
Impedance | 75 Ohms |
Frequency Range | DC-2 GHz |
VSWR | |
Straight DC-2 GHz | 1.33 max |
Right Angle DC-2 GHz | 1.43 max |
Contact Resistance | |
Center Contact | ≤ 6 mΩ |
Outer Contact | ≤ 1 mΩ |
Voltage Rating (Sea Level) | ≥ 335 VRMS (depending on cable) |
Insulation Resistance | 1000 MΩ |
Insertion Loss Maximum | |
Straight 1.5 GHz | 0.30 dB |
Right Angle 1.5 GHz | 0.60 dB |
Dielectric Withstanding Voltage (Sea Level) | 750 VRMS |
RF Leakage | 55 dB min @ 2GHz |
Environmental | |
Temperature Range | -65⁰C to +165⁰C |
Thermal Shock | MIL-STD-202, Method 107, cond. B |
Vibration | MIL-STD-202, Method 101, cond. B |
Mechanical Shock | MIL-STD-202, Method 204, cond. D |
Humidity | MIL-STD-202, Method 213, cond. B |
Mechanical | |
Mating | Snap-on coupling (MIL-STD-348) |
Cable Affixment (Braid/ Jacket) | Hex Crimp |
Cable Affixment (Center Conductor) | Crimp or solder |
Engagement Force | ≤ 14 lbs (62N) |
Disengagement Force | ≥ 2 lbs (9N) |
Durability (Matings) | 500 cycles min |